These types of brush have twisted wires and they are considered as rough brushes, which are useful to remove descaling, deburring, removing rust and adhesive residues, for preparing and cleaning welding seams as well as removing excess rubber from vibration mounts. Moreover, it is possible to use some of these brushes beside each other on a concentric line to increase the efficient surface.
| Diameter | Width | Trim Length | No of knots | Arbor Hole Information | Packaging | Round Per Minute | Carbon Steel Wire 0.60-0.70 mm | Stainless Steel Wire 316/0.60-0.70 mm | |
| قطر برس | ضخامت برس | طول یال | تعداد رج | مدل مرکز | سایز | تعداد درکارتن | حداکثر دور در دقیقه |
مفتول فولاد آلیاژی 60/0 – 70/0 |
مفتول ضد زنگ 316-60/0- 70/0 |
| D | B | L | Z | C | Size | N | RPM | CS 316 /0.60-0.70 | SS 316 /0.60-0.70 |
| 100 | 10 | 19 | 22 | سوراخ hole | 10 | 60 | 12000 | 101 | 121 |
| 100 | 10 | 19 | 22 | سوراخ hole | 22.2 | 60 | 12000 | 102 | 122 |
| 100 | 10 | 19 | 22 | مهره nut | M14*2-Ww 5/8 | --- | 12000 | 103 | 123 |
| 115 | 10 | 25 | 28 | سوراخ hole | 22.2 | 60 | 11000 | 104 | 124 |
| 115 | 10 | 25 | 28 | مهره nut | M14*2-Ww 5/8 | 60 | 11000 | 105 | 125 |
| 125 | 10 | 28.5 | 28 | مهره nut | M14*2-Ww 5/8 | 30 | 11000 | 106 | 126 |
| 150 | 8 | 35 | 40 | سوراخ hole | 22.2 | 30 | 9000 | 107 | 127 |
| 175A | 8 | 38 | 48 | سوراخ hole | 22.2 | 30 | 8500 | 108 | 128 |
| 175A | 8 | 38 | 48 | مهره nut | M14*2-Ww 5/8 | 30 | 8500 | 109 | 129 |
| 175B | 10 | 38 | 48 | سوراخ hole | 22.2 | 30 | 8500 | 110 | 130 |
| 175B | 10 | 38 | 48 | مهره nut | M14*2-Ww 5/8 | 30 | 8500 | 111 | 131 |
| 178 | 14 | 35 | 30 | سوراخ hole | M14*2-Ww 5/8 | --- | 8500 | 112 | 132 |
| 178 | 14 | 35 | 32 | سوراخ hole | M14*2-Ww 5/8 | --- | 8500 | 113 | 133 |
| 200 | 16 | 40 | 54 | سوراخ hole | 22.2 | 20 | 6000 | 114 | 134 |
